Automotive Non-dismantle Fuel System Fuel Injector Cleaner Tool Fuel Injector Tester and Cleaner Kit

It came super fast...all pieces were there and had my repair much more affordable

The Schrader valve connector broke before I tightened it half way. It's a very cheap kit and it took me 3 days to find a replacement Schrader valve connector to replace it without ordering it online.

Connection for GM fuel rail did not sit properly and snapped in half. The kit looked like it would be pretty decent but the quality of the metal tips would definitley not hold up. Also, as with every one of these chinese made kits, you will need to replace the air connection if you can get it off or the whole air regulator and replace it because the air connection is glued on.

Poor quality, seals, shut offs & fitting's all broke within 6 uses.

Great product great must have for auto tech working on direct injection motors.

It work just the way it should

Cheaply made has to modify for a quick job or would’ve returned

The thread sealer was still wet to the touch when product was removed from case. First, you will need to change the air nipple to match a standard chuck. Then, remove the air regulator to obtain access to that check valve. Remove, disassemble and remove thread sealer to allow air to pass thru. Reassemble and reinstall check valve and regulator. Next, the Schrader valve adapter will not attach to the stem. Even after removing the core, the threads would not engage. Solution, disassemble and remove material from the inter body of the adapter. I turned it down about .060 in a lathe. The rubber seal will need to be trimmed to match. It now works fine.